You are reading a single comment by @gbj_tester and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
gbj_tester
Shutter Precision PV - 8 dynamo hub: the flange spacing is ~50mm i.e. narrow. I've broken a couple of spokes on a wheel built with this hub, both times I was riding light off-road terrain. Wondering if it's worth having the wheel rebuilt again or if it's asking too much of this hub geometry to deal with the lateral loads given the low spoke angle. The wheel is a few years old. Informed opinions welcomed.