You are reading a single comment by @Dammit and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Dammit
No, I ordered those from an engineering place. My pads were about 3mm from the edge of the disc, with these they’re right up to the edge. I’m thinking that maybe slightly shorter spacers and a 1mm gap would be wise, but maybe it’s fine. Previously quite a lot of the pad only saw rotor surface when an arm passed through the calliper.