Wtd: 8cm or so heatshrink tube - 25mm diameter

Hey, wondering if anyone has a short offcut or spare bit of heatshrink tube going spare - I'm making a little climbing rope dog lead and want to try tidying up the loose ends off the knots with a bit... Rope is 11mm so I guess 25mm starting diameter of the heatshrink would be right as it would shrink down to the double thickness and the single thickness of the rope - in fact if anyone could confirm that it would also be great as I've never used it before 😁

About 8cm or so total would be amaze 👍🏼

I’ve picked mine up in last year off eBay ,most of the sellers have descriptions of internal diameter before and after heating

Normally you only want the heart shrink to be 25% bigger than what your diameter you want to cover is, your rope will compress as well. Most common are 2:1 and 3:1 ratios. You also need to bear in mind that heat shrink shrinks down and in, thinner and smaller. I've got tubes up to 10mm or then 40. Rs is a good place to get some.

Red or black?

Pm me and i can stick some in the post today

thanks for the input people, really useful - Matisse, thank you that would be great, will message shortly.