Threaded insert question - How big should I be drilling the hole for the inserts.
The specs say a pilot hole measurement of 6.6-7.2.
I'm thinking 7mm drill bit, and epoxy the thing for added strongth.
Assuming you're putting it into wood then epoxy won't really add anything because the wood fibers will break before anything else anyway. For the hole size: softer material = smaller hole.
@chiroshi started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Threaded insert question - How big should I be drilling the hole for the inserts.
The specs say a pilot hole measurement of 6.6-7.2.
I'm thinking 7mm drill bit, and epoxy the thing for added strongth.