You are reading a single comment by @Howard and its replies. Click here to read the full conversation.
  • Just ordered one of these https://www.toolstation.com/vivanco-dual-arm-tilt-swing-tv-wall-mount-bracket/p32486 to mount the telly (32") onto the wall in the lounge.

    Most of the time the telly will be swung out a bit so we can watch it easily, but it'd be nice to be able to push it back against the wall if it's not needed. The mount of movement it gives should easily be enough for a 32" TV.

    Given that it won't come with fixings, what are the best options for mounting it onto a brick wall (the wall is one of the external walls if that makes a difference, no reason to think it is anything but normal brick)?

  • What does the manufacture recommend?

    A reasonably large rawl plug would be just fine as long as it has a good few mounting points.

    you will end up smashing massive holes in to the wall then fitting anchor bolts for a 10kg tv, I suspect ;)

  • Haven't picked it up yet, so don't know what the recommendationsare, couldn't see any details online.

    Current telly is only 4kg but would be nice to make sure it could handle a 43" telly (which is usually 8kg or so).

    Plus it's going to spend most of its time at almost full extension.

About

Avatar for Howard @Howard started