It's the old carb YBR with the extra 2 horses of power over the efi 💪.
Yeah, heard some horror stories of frozen swing arms and cracking! With all the suspension off its moving free across the full range of motion now and no play, I just can't get that bolt out to service the bushes or re grease.
New caliper mounting bracket was fouling the front disc bolts by a mm so had to file that back, rain stopped play before I got to bleed it through.
New dash's loom is nothing like the loom on the bike so that's been fun too. I wasn't going to bother and see if I could just blag the lights not working on the little cafe clock but thought I'd give it a go. Everything works except RPM so far.
Ah fair enough!
Stick it on its side and feed it kroil every few hours for a week, then get a decent air impact and just blast away back and forth. You'll get it eventually, don't use a socket and a huge breaker bar, higher risk of snapping it
It's the old carb YBR with the extra 2 horses of power over the efi 💪.
Yeah, heard some horror stories of frozen swing arms and cracking! With all the suspension off its moving free across the full range of motion now and no play, I just can't get that bolt out to service the bushes or re grease.
New caliper mounting bracket was fouling the front disc bolts by a mm so had to file that back, rain stopped play before I got to bleed it through.
New dash's loom is nothing like the loom on the bike so that's been fun too. I wasn't going to bother and see if I could just blag the lights not working on the little cafe clock but thought I'd give it a go. Everything works except RPM so far.