You are reading a single comment by @BrickMan and its replies.
Click here to read the full conversation.
-
Hot melt glue?
Its what I do with rear's on bikes with rear mudguard mounted lights (and no rack), clean the hell out of it, find an edge that the cable will sit against, melt some glue onto it, tension, add some glue, repeat every 5-10cm. This is on the underside BTW! have done one on the top before, and am strongly considering it for mounting my own lights, zip tieing to gear/disc hoses never stays neat for any amount of time, always twists around and goes baggy in some places and short cuts the outer cable in others**where possible, have used heatshrink over the outer cable/disc hose, install dyno cables, then very lightly shrink it, looks super neat/factory for years, but does eventually split and decay from UV I guess.
BrickMan
Skülly
I will still enuire about grippers like the top right one, maybe there's a smaller dia version out there (those are for hydro hoses which are 5mm I think).