You are reading a single comment by @doug1e and its replies.
Click here to read the full conversation.
-
I also had a similar one with a different clamp design but I couldn't tighten the cups enough to hold the saddle. It slipped at basically every road bump. I changed to one of these and have no regrets since. Except for the fact that I had to change one too long screw because it drilled into the carbon shell of my saddle
bibimbap
@doug1e
Got an aliexpress carbon 25mm layback seatpost 27.2x350mm. Good bits; came in about 2 weeks , has a lot of good reviews, weighs 180g, looks quite nice, didnt slip on first 16miles so far with seatclamp at 5nm. Bad bits; epoxy spilled out onto bonded alu ring and had to be cut out with a knife to get clamp to fit, largest diameter on it is 27.00 smallest is 26.8, have to really over tighten the rail clamp to stop saddle moving (probs not good if you have a carbon rail).
1 Attachment