-
Would the adhesive clips not work?
I will link in a mo. ThisBQTQ 30 Pieces Cable Holder Self... https://www.amazon.co.uk/dp/B08CSM386Y?ref=ppx_pop_mob_ap_share
This pic is a cable guide but I use it for holding the loft handle. Plenty strong enough for a cable as it has held that handle for over a year. Sorry I don’t have a link but I think I got them from eBay. Available in various colours and there are ones which hold two cables too.
1 Attachment
-
TGR
-
This is also a good shout as these things are amazing.
However, the fit could be tight.
This is one on the back my laptop stand with a Lenovo power cable and a thick braded Spigen usb-c cable.
They are a very snug fit so I would worry about the cable forcing the rubber into a non-flat shape if that makes sense? So I'd double up on the sticky stuff or maybe use the type of adhesive I mentioned above.
hugo7
Thanks. I had a go - nails just bent over. Render 1, Clips 0. I wish 2mm masonary bits existed so I could pre drill.
Thanks for the link for the trunking, that's spot on for another job I need to sort, but for this TV aerial I'd like to avoid trunking if possible so need to figure out a way to get these clips on.