You are reading a single comment by @amac090 and its replies. Click here to read the full conversation.
  • I've been running waxed chains for a few years now.

    Typically get 6,000km+ out of a chain before it starts to show any wear. That's on both summer and winter bikes. I rotate between two chains on each bike, and I "top up" with Squirt between waxes. I normally get 300km out of a chain before I top up with the squirt and run it for another 300km before swapping out to the other chain. This means I only wax chains once a month which is a quick and easy process. I don't bother cleaning the chain other than a quick wipe with a towel - the hot wax melts off the rest of the dirty wax.

    Would definitely recommend a liquid wax lube to top up between immersions though so you only have to break out the crock pot every 1000km or so.

  • What is it that tells you when to top up with the squirt lube? Do you do that when the chain starts squeaking, or some other signal?

About

Avatar for amac090 @amac090 started