You are reading a single comment by @gbj_tester and its replies.
Click here to read the full conversation.
-
I can buy a cane creek 110 ec44/33 for about £65. But I’d like to move away from the 1.25” headset if possible
The Cane Creek will last 110 years, which is longer than you or the fork (or probably Cane Creek) will last. Might as well go that route rather than fitting an adapter crown race just to get a 1.5" lower bearing.
gbj_tester
Sorry to be asking this again... I’ve got a fork with a 1.25” tapered steerer. Going into a straight 44mm tube I would be looking for an ec44/30 headset. Is there a crown race out there that will let me use a ec44/40 headset that isn’t the lauf one? As far as I can tell it’s got a bit of an awkward bearing angle.
My searching isn’t really being very successful, I can buy a cane creek 110 ec44/33 for about £65. But I’d like to move away from the 1.25” headset if possible as it seems pretty obscure.