You are reading a single comment by @Rik_Van_Looy and its replies.
Click here to read the full conversation.
-
Try cable but keep the door open to hydraulic
This is me having just gone to disc and 12mm about 6 months ago. Have raced cross on my spyres and set them up myself with no bother. They were easier than most cantis to get good performance, I found. I can't remember what cable outer I have...
-
Try cable but keep the door open to hydraulic
Buy cheap buy twice
-
big fugly ergos
Are they even that ugly anymore? RS505 yes sure, but the current gen aren't so bad and the Di2 Amey posted is nice enough. Also GRX does 10 speed hydro
On reliability I have shimano br505 (with the ugly rd505 stis), that I bought second hand, i just get it serviced once a year and i've had no problems. you don't have to adjust them for wear either.
fizzy.bleach
dancing james
stelfox
@Rik_Van_Looy
Thanks for your input all, this is potentially a tough call with 3 options emerging....
1) Fully commit to cable.
External routing, minimum cable outer (compressionless where used) cable stop locations for minimum cable bend. Then get BB7s or Spyres, decent rotors and pads and work out how to dial them nice.
2) Commit to hydraulic - a spendy solution that ends up with big fugly ergos and 11speed or more...
3) Try cable but keep the door open to hydraulic
Internal routing may compromise cable performance and some day when the smooth lines of an ultegra hydro are at winter-bike kit level make the change...