You are reading a single comment by @snottyotter and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@snottyotter
Stick it in smallest cog at the back, big at front, tighten the high limit screw, probably the bottom one in the bottom pic, but the mech should move when you tighten it assuming the amount of cable tension you have is pushing the mech to it's limit. Tighten until it rubs slightly then back it off until it doesn't, if it still rubs in the big cogs don't use those gears, or deal with a bit of rub in the smallest by tightening the screw a bit more, but shifting might be shitter.