The case has an inset rail on each side that is the size and shape of a large zip tie, with a cutout at the bottom to fit the head. The zip ties are there to provide something to pull on to remove the case from the steerer. I also made some custom one-inch spacers from CF-PETG, of which the top one has a cutout for the wire to exit. A TPU top cap mates securely with this and the inside of the steerer to seal everything up.
The case has an inset rail on each side that is the size and shape of a large zip tie, with a cutout at the bottom to fit the head. The zip ties are there to provide something to pull on to remove the case from the steerer. I also made some custom one-inch spacers from CF-PETG, of which the top one has a cutout for the wire to exit. A TPU top cap mates securely with this and the inside of the steerer to seal everything up.
3 Attachments