You are reading a single comment by @withered_preacher and its replies. Click here to read the full conversation.
  • I'm not massively happy with the satin finish on mine either. Brush applied, three coats w/ sanding in between.

    Still planning to sand mine back, address two gaps I missed and use my spray gun to see if that applies the varnish more evenly. Spring job though.

  • Not every finish allows it of course but I find that using a cloth for application always works better than brushing. It means a lot more coats because of the thinness, and also more control for the same reason.
    I’ve no experience using a spray gun for this kind of thing.

  • I've tried a cloth before but didn't think the finish was that great - as you say; could be the varnish / cloth or my poor technique.

    I'm going to do a couple of test pieces with the sprayer before I start prepping the desk top though.

    Won't be doing anything until the temperature hits at least double digits.

  • I saw someone on YT using a special glove rather than a cloth to apply finish. Almost as good as the ice cream glove.

    (If anyone knows what kind of glove I can use to do this let me know - I get pain in my hands when applying finish with a cloth.)

    6.36 in this vid
    https://youtu.be/F6p_BNwmWB0?t=396

About