You are reading a single comment by @deleted and its replies.
Click here to read the full conversation.
-
You can cut it out and leave the good plaster. But you’ll need to replaster in lime to get a good bond.
Or you can take the entire wall off and use some gypsum to redo it.
I’d do the latter.
deleted-
By the time I chase the loose stuff, if it gets anywhere close to half the wall, I would go that way too. Bought a bag of lime plaster in case there is an amount I can do myself. The external wall is lime plaster on brick and there's probably only a couple of square ft of that that isn't solid (to my knowledge).
stevo_com
Failing that, any suggestions for what to to with a lathe and plaster internal wall where probably half of the lime plaster is blown?