You are reading a single comment by @snoops and its replies. Click here to read the full conversation.
  • Anyone else tried applying squirt by full immersion?

    I’ve been using it successfully for six months across off and on road bikes for by drip method, but the wax wasn’t staying in as long as I’d hoped so I dipped three chains recently. I’ll report back.

    FYI a previously deep cleaned and then squirted chain can be taken back to bare metal quite easily with boiling water and a dash of degreaser.

  • I've not, just boring parrafin but I might give it a go. I've stopped cooking mine and gone to a wet lube Krytech thing which just pisses everywhere and doesn't last very long. It's not like the Finish Line Ceramic I used to use. Might look for Squirt once this bottle is done.

  • What do you mean by full immersion - 100% Squirt? if so, that's gotta be pretty expensive compared to the standard waxing method.

  • I haven't, but I do two proper applications (both left overnight to dry) before the first ride. It's worked pretty well so far and I haven't had too much issues with gunk either (I wipe off the excess, maybe it helps?).

About

Avatar for snoops @snoops started