I have an issue with a sram Truative MTB Crank and GXP non drive side bearing cup.
The non drive side bearing cup has a smaller hole right? so the axle does not go all the way through as the Truative axle starts to cone and get larger towards the centre.
Is there anything i can do about this? i have about 2mm of axle showing on the drive side.
I can still tighten the non drive side with the crank on and it is smooth.
are there any options?? (besides getting a shimano zee crankset)
Hello! I wonder if anyone can help please.
I have an issue with a sram Truative MTB Crank and GXP non drive side bearing cup.
The non drive side bearing cup has a smaller hole right? so the axle does not go all the way through as the Truative axle starts to cone and get larger towards the centre.
Is there anything i can do about this? i have about 2mm of axle showing on the drive side.
I can still tighten the non drive side with the crank on and it is smooth.
are there any options?? (besides getting a shimano zee crankset)
Thank you
1 Attachment