It is, at the track end.
I'm not quite sure if I understood how this works. Are the stays only held together by 3 bolts and the dropout plate?
Are the stays only held together by 3 bolts and the dropout plate?
There is a vertical bolt not shown in the drawing which passes through the lower part, then the jigsaw piece, then the upper part and finally into a barrel nut set in the upper part.
@bibimbap started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
It is, at the track end.