You are reading a single comment by @dglshrn and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
dglshrn
RX4 front calliper routing is nasty isn’t it. Some funky angles if you use the Dale guide... looks like you ditched it?
Take it you’re struggling to find the rear at the moment in flat mount? I’m also having issues tracking down a purple flat mount front :(
I drilled and hacked off parts of the BB ‘sump’ to allow the cable to pass on the outside avoiding the spindle.
Do you need a di2 grommet for the seat tube? I can pop one in the post if you want. Drop me PM.
That mouldable glue putty stuff is good for filling the empty entry points and also holding the rear Di2 cable in place - just ram in down the hole and let it set.
@dglshrn probably £115... it’s got non rounded bolts (thanks Enve who sent me some spares) and doesn’t slip at all like the internets ones do (apparently). Carbon paste and locktite ftw.