Chain skipping?

You are reading a single comment by @PhilDAS and its replies. Click here to read the full conversation.

•

Tijs

Are you sure it's the chain skipping, and not the rear cog unscrewing while skidding and then tightening again when putting power on the pedals?

•

PhilDAS in reply to @Tijs

I've had that before.

There's a lockring threaded on after the cog (with reverse thread) which stops the cog unscrewing. Check if it's tight up against the cog and you aren't able to unscrew it by hand

•

user116436 in reply to @PhilDAS

What kind of tool do I need for that?
•

Tijs in reply to @PhilDAS

But first check if the cog itself is tight, because you might have unscrewed the cog tight against the lock ring while skidding. Then the lock ring seems tight, even though the cog is not fully engaged on all the hub threads.

About

Avatar for PhilDAS @PhilDAS started