You are reading a single comment by @Cornish_Bike and its replies. Click here to read the full conversation.
  • trouble is the heating takes priority so the hot water was not getting above 35 degrees on warm days...

    What’s happening here?

  • This

    I have to set the curve to 3.4 to ensure that the flow temp for the water is hot enough for the hot water tank. Ideally it would be at 1.8....we are going to separate the hot water heating from the heating circuit and the boiler will control that independently, as regardless of outside temp we need hot, hot water.


    1 Attachment

    • 9A22CFAD-05D0-4CD7-B750-5FBF1865CA9A.jpeg
About