You are reading a single comment by @Howard and its replies. Click here to read the full conversation.
  • Nice job - shortly after i'd finished doing mine, my wife put something covered in some industrial cleaning product down on it & left a lovely big black ring in the middle...

    Which reminds me, I never got round to doing the bit surrounding the sink - it's still a bit flaky & generally minging looking, did most of mine by hand which was not a pleasant task - still finding dust in strange places, do quite like the smell of danish oil though

  • Yep, fairly soon after I started I stopped feeling quite so manly & realized I had made a terrible mistake... I did another section with paint/varnish remover which took ages to work, stunk the house out & left a sticky mess which needed sanding off anyway which was also not pleasant, and another bit which I attempted using a small sander I found up the loft (I don't have a sander) which was just as bad, as it was a piece of shit that barely worked - probably why the previous occupiers left it up the loft.

    The manual approach with a big sanding block & the roughest skin-ripping sandpaper you can find is quite satisfying for 5 or so minutes though.

    Oh, I tried a heat gun too - this worked well if you had the patience to do 2cm squared at a time, very carefully... ended up with numerous scorch marks that had to be sanded anyway...

About

Avatar for Howard @Howard started