You are reading a single comment by @hma and its replies.
Click here to read the full conversation.
-
I find them quite pricey, think those are gen1 which had some issues, but can't remember what. :)
Prices usually float around €200 for previous generation (with the older logo) complete with spiderrings and axle. So £195 sounds steep. Ideally you would need to know is the axle is still ok. If the lot has been torqued correctly and well maintained, everything should be fine.
I wouldn't pay more than €150 for those, which would still be generous imho.
LeMesjeu
@hma
is £195 reasonable for a set of SISLs? 172.5 length, 110 spider with 50/34 mkV rings, axle, spacers - the whole lot. will install a brand new lockring as the original one snapped. has some scuffs from use, but the chainrings are good.