You are reading a single comment by @Nick_S and its replies.
Click here to read the full conversation.
-
Undo the nut that you'll find inside whilst holding the axle still with a spanner, or hold in a vice.
Undo the cone and be careful not to lose the ball bearings everywhere.
[ reanimating a zombie thread, but it seems to be the closest to my query ]
Before I strip my traditional SR quill road pedals down, can someone please confirm whether the locknuts and cones turn anticlockwise to undo on both the left and right pedals?
Nick_S
Prise off the end cap with a knife, or thin screwdriver
Undo the nut that you'll find inside whilst holding the axle still with a spanner, or hold in a vice.
Undo the cone and be careful not to lose the ball bearings everywhere.
Remove pedal cage from axle.
Clean, regrease
Assembly is the reverse.