-
Curious they mention finish line lube, I’ve always just used WD40 and the lightest chain lube I’ve got handy. Figure it needs to be light and clean to avoid gumming up the works.
We have 3 kryptos: standard grey d-lock < Evo 7 orange d-lock < NY FU chain. Never had an issue with the lock on the chain, except maybe the key not going in all the way a couple of times. That sounds like what’s happening to you. It’s also a much more common occurrence with the standard grey d-lock.
I have a embedded muscle memory of inserting the keys and turning it a few degrees each way just to make sure it’s all the way in. Usually if it looks strange it’s because it hasn’t gone into the last disc.
Edit- do the edges on your key feel smooth? They do on my better locks, but not on the cheapest. If I were you I’d give the lock a solid second of WD40 straight into the keyhole.
Adhiero-
I sometimes end up spending 5 minutes fiddling with the lock ... once I gave up after 10m and walked to my destination and came back a few hourrs later to try again. Does feel like they just reach an impossible point eventually. but maybe i'm harsh on my locks ... have been using GT85 ... maybe thats the issue
r_mash
I've got the more expensive yellow NYC one and that has become a pain now.
its this problem: https://kryptonite.zendesk.com/hc/en-us/articles/231010947-ULock-key-Jamming-or-Stuck
where i can't get get the bits aligned. It's my 3rd kryptonite ... :(
@ltc
@aggi
@Brun
what's the diff between graphite powder, dry teflon lube (as suggested by kryptonite) and teflon grease?