Talbot ISP Di2 one-by, disc braked, ENVE wheeled Gnarmac, complete bike

I’ve not ridden this at all in 2020, I’ve just cleaned it a couple of times.

Would anyone around my height (187cm) be interested?

It’s Porsche Aga Blue, which looks great in the metal (I think, but I would say that).

XTR mech, R-785 shifters/levers, Cannondale cranks with Power2max power meter, ENVE wheels, 3T finishing kit, SRAM billet cassette, DT Swiss 180 centre-lock hubs and Freeza rotors. Front brake is flat mount, rear is XTR postmount.

I threw the wallet at this one, but it’s a few years old. As such I’m not sure what to price it at - let me know if £2,000 is outrageous.

1 Attachment

(If anyone could make the image link work I’d be obliged, I can’t seem to do it).

Images link should work:

https://flic.kr/p/Z2oPVA

If I'm not just finishing off my own build which is very similar, I would have been all over this.
Lovely stuff!

Jesus Christ. Absolutely lovely GLWS

Edit... What’s the clearance?

At the front there’s plenty, at the rear it’s quite tight, 32c tyres front and rear. You’d not be able to go larger at the rear I don’t think, but you could go to 650b as there’s a lot of lateral clearance (wishbone stays).

I wish I was a little bit taller etc etc. Banging price for a fully kitted bike.

You could saw a bit off the seat mast and fit a shorter stem, but it’d change the looks a bit I think.

Lovely

That is absolutely stunning.

It’s the best bike I could build at the time that I built it, and it was meant as a mountain bikers road bike, if that makes sense- mixing MTB components with road parts to make what is a very fast yet comfortable road bike that can also handle somewhat bumpier/looser surfaces.

Do you have the geometry?

Lovely, what’s the headtube length in cm ?

Could this be converted to 2x?

neil! keep this, lets do a gravel ride this weekend. By gravel I mean bridleway muddy bogs.

Incredibly relieved that this isn't smaller

Absolutely incredible 👍👍

I’m up for this, but I’d use the 529. You may want to deflate your rear tyre to even up our relative speeds though.

cool will whatsapp

I’m going to say maybe- it was never designed for a front mech and there is no provision for a cable run, but AXS could solve that. Clearance with the rear tyre would I think be fine but I’ve never checked.

I’ll measure it today and will post.

I doubt it, but happy to stick the tape measure on it if you tell me what measurements you would like.

I generally ride a 56cm square frame with a lot of post and a long stem, for reference.

Cool cool thanks, whilst you’re at it might as well Measure the seattube & top tube

PM’d. Thanks. T

Stunning. But too big for me, much to the relief of the bank manager.

good stuff !