Tool library / tool exchange. Post what you got and where you are

Morning all, does anyone have a 3 arm puller to remove a crank arm that's stripped?

Or any other tool that will do the job?

I saw this and it looks easy enough https://youtu.be/jrpIoXxVyTs?t=193

this is the product https://www.amazon.co.uk/Universal-Gear-Puller-indoor-outdoor/dp/B009FDC80I

I can come to you with a frame and do it there and then if that's easier.

Thank you

If it’s not extremely stuck on, and you don’t mind risking the crankset and BB, you can try applying liberal amounts of penetrant WD40 and then gently hitting the crank arm outward with a mallet, on the underside of the arm. If that doesn’t work, you can wipe off the excess fluid and apply heat to the crankset with a hair dryer or boiling water, then tapping the crankset again. It’s sometimes enough to loosen it off.

Edit-small auto shops might have a gear puller and might be willing to have a go for £

I'll wait and see if I can get it off with a tool before I consider heat and sacrificing it.

Thank you

I have something less finesse and bit more crude - a wedge which you slide between the crank arm and the BB and hammer down. It lives at the bottom of my tool box in SE1 and you're happy to have it but it needs to be returned before the sun sets... ;)

Sounds good mate, will pm

Hey, Im looking for a splined bb tool and a regular crank puller in london if anyone has some i can pick up asap! based in n15. Thanks

Got both of these you’re welcome to use, I’m in E10.

I also do - bottom of Ally Pally, in N8

Bit of a longshot but does anyone have the castle tool and SPA-1 park tool pliers for servicing Headshok forks?

Sounds useful. Make it yourself?

Already have one and @srocha (thanks for the beers!) witnessed it in action! ;)

I meant, did you make it yourself? :)

Does anyone have a head tube reaming/facing tool with a 30.1mm cutting bit for a 1"?

Bit of a long shot I know; need to get a 1" JIS-sized frame reamed to fit an ISO headset and all bike shops are fully-booked...

Happy to use on-site if that's possible.

Many thanks in advance!

I meant, did you make it yourself? :) 9 days ago

Was it something I said?

Hey folks,

I need to re-tap my bottle & rack cage holes after a recent powdercoat.

Does anyone in East London have an M5 tap I could borrow? or a link for something cheap I can order online?

Thanks in advance.

Has anyone got Hope Pro 2/Pro 4 Hub bearings tools I could borrow sometime in the near future? NE London as a bonus

Does anybody have a Park Tool Unisex's SW-16.3 Hex Socket Internal Nipple Spoke Wrench Tool, Blue, 3/16-Inch I could borrow for beers?

Anyone got Any snap ring pliers? or Park Tool RP-2? Beer, wine / lemonade in it for you.

One of these also would work.

Got one of these in E10

Anyone has a praxis M30 bb tool to lend in E10/east London?

Ive got one right there, but Im only coming back to London on the 28th. Hit me up if you still need it then!

Solved, thanks a lot though

Do you / anyone have these? I got Park Tool SPA-1. Also need the SPA-2 OR similar tool for getting dust caps bolts off 7700 cranks

Got SPA-2 in E10