Big ol' clearout MTB kit: XT deerhead, older XT, XTR, LX, Syncros etc THREAD CLOSED

Shimano XT FD-M737 front mech.
Pretty excellent condition, there's some alloy rainwater staining but nothing else to speak of. Mechanically all's well, no play anywhere and all threads are good, the cage does show slight chain contact scoring and chrome loss but has years of life to go. Clamp size 31.8mm. Top pull.
£10> £8

Shimano XT RD-M735 rear mech
Very nice condition although there are slight scuffs along the parallelogram front and lower pivot but apart from that very tidy looking. Jockeys do show wear and the lower jockey is a replacement alloy cartridge bearing one (I can find an original one if required). Threads are all good with no seized bits and pivots have no play. For 7 speed setups.
£17> £15

Suntour Alpha-5000 front mech
Pretty excellent condition, there's slight wear to the logo but nothing else to speak of. Mechanically all's well, no play anywhere and all threads are good. Clamp size 28.6mm. Bottom pull. The mech was taken off a Muddy Fox with triple setup although the ratios weren't that wide, so the mech isn't designed for the kind of ratios that some of the other mechs listed here are.
£8 >£6

Marin Lite saddle
1993/94 saddle with blue rails. In good condition with a few marks in the typical areas. The leather cover shows no real scuffs and has no cuts etc. Padding still very comfy. A few chips to the cr-mo blue rails, mostly around where the seatpost has been clamped. Marin logos still visible on one of the sides and the rear.
£20

Selle Bassano Vuelta USA saddle
A quality saddle with the extra width and padding which makes it more suitable for offroad riding. The styling also suits this, plus it's a pretty rare saddle. Condition is excellent for the leather cover, with no scuffs and stitched logos are fine. Cr-mo saddle rails do show signs of wear though. The rails don't feel bendy to ride on, and the padding isnt compressed, so I'd guess the saddle's had an easy life.
£15> £13

Shimano LX SL-M570 thumbies
These are fairly rare in this colour. 9x3 gears. Pretty excellent condition and the shifters still look very tidy, although the LX logos have worn off and there's a couple of scuffs to the dark blue finish. Mechanically all's well and the indexed shifting action still feels crisp with no mushiness. All threads are good, nothing's seized and the plastic covered levers show no wear.
£20> £18

Shimano LX RD-M570 rear mech
This is a pretty rare mech in this colour. Quite good condition except for the noticeable scuffs mostly along the bottom of the front of the mech. Jockeys are starting to show wear. Threads are all good with no seized bits and pivots have no play. Jockeys are original. For 9 speed setups.
£15> £12

Easton MonkeyLite SL carbon riser bars
These are the super light version of the MonkeyLite bars, so weight a tiddly 132g. They've not been cut down so are the full 610mm length. They take 25.4mm clamp stems and have a small rise. They're in fair condition as the lacquer around the centre area has chipped mostly above where the logos are, but this doesn't look too bad and can always be gently sanded down and revarnished. And besides the bars being the super light version they still feel very stiff in use.
£10

Shimano XTR RM-M950 rear mech
This is the medium cage, non Rapid Rise version.
Pretty tidy condition for this derailleur. It's seen moderate use over the years and is just starting to show it cosmetically, although mechanically not at all. It's in excellent working order with no play in the pivots and v tight spring tension. All threads are good, everything's in alignment and no bolts are seized. The only real niggles are that the grey ano finish has light scuffs here and there. For 8 or 9 speed drivetrains. It is compatible with the Rollamajig cable guiding type devices.
£25

Muddy Fox quill stem
A 1" quill stem with quite a high rise. 95mm length and for 25.4mm stems. This has a smart brushed alloy top section with steel for the shafts. It has a cable entry hole to help with canti brakes. In pretty excellent condition with the alloy bit having virtually no marks. All threads are good.
£10

Saracen Team quill stem
A 1" quill stem with a fairly high rise, although a little less than the above stem. It's steel with a nice matt finish. One of the logos is a bit faded. Still has the original shafts bolt cap. All threads are good.
£7> £5

Suntour XCD front hub
It's a 36 hole hub and is nutted. It's in virtually unused condition, but the finish does show some marks around where the logo is. No marks from spoke pressure against the flanges, which are regularly seen on most used hubs. I've had a quick look at the bearings and this confirms my above thoughts since there's virtually new grease there, and cones and races have only the barest traces of usage.
£7> £5