SSCX Only!

Found a 21t surly that's going spare. Couple of 19ts too. Only 20t is Chris Bling so I'll hold onto those.

Changed the cranks to a set or SRAM road cranks to improve the chain line as it wasn’t great with the cheap MTB cranks! I’ve retained the purple chainring. I managed to get a set of purple grips fitted to add some purple to the front end!

1 Attachment

That setup looks real fun but surely that gearing is crazy low? You must spin out real quick on the road.

It’s not a road bike......

For flip-flop hubs like Novatec A186 or Miche Primato, is there any difference in chainline between fixed and SS side? Thinking about upgrading my Singlecross, but not sure about what chainline would I need.
Also, how do you rate the square taper Sugino cranks that are mounted in Singlecross stock? Wondering if I should keep them and only buy a new chainring, or swap everything for e.g. Alfine crankset or SRAM S350 (not sure about the optimal chainline, one is 42,7, the other 45,5 mm).

crocket 2016 + wi eno hub

1 Attachment

I've got an 130mm Eno for sale if someone needs it

spoke count ?

I think 32h. I can confirm plus take photos a bit later if you are interested

@Glws

32h and 130mm

1 Attachment

Very nice that, got any more details?

It's a Rew10 owned by mon_jya on Instagram. There's another too in yellow, or the same one repainted. Or maybe two different front ends? How rad would that be.

@clockwork_killa @andyp

on your crocketts, did/do you route your rear cable with full length outers or did you stop it at the downtube and run it "naked" inside the frame? i would go full internal outers but i fucked up my cuts and don't have a long enough run now

what colour bar tape? I have black but there's a world of colour to choose from

1 Attachment

shame about cable discs

Black, White or purple

Still better than mt400

Brake or gear cable? Either way, mine has hydraulic discs and di2 so can’t help I’m afraid.

I thought one bike CX was supposed to be cheap?!

im gonna be boring and go with black @Hulsroy, thanks.

@andyp I think I fixed it as you can see. found enough to get a full run

@amey did you use hydro in both the races you did before you sold your cross bike?

The rear routing on those is absolutely shite; its a frame made for hydros

Even paul klampers are worse than mt400; hydro or nothing

hydro or nothing

50/50 chance of either when you pull a Shimano lever

zinger!