-
I get weatherstripping from a few places but Mighton seem to have a good selection.
https://www.mightonproducts.com/products/sash-window-hardware/weatherstripping-beads/weatherseals
You need to measure the groove and the gaps obviously but it should be pretty obvious what the options are once you've measured. If possible I like to use a seal that has some acoustic properties as well as draught sealing.
Just to add, I've never found one in small quantities from the big box depots that lasts. I usually buy a quantity of the expensive stuff and then I'm fitting it to different places for a few years. My go to for that purpose has been the corner type which wouldn't work because you have the groove.
-
The wide and shallow slot looks like it has been cut for a seal carrier and brush pile.
Brush is available in different height pile and base width, but here's an option
https://www.mightonproducts.com/brush-preinserted-into-flat-carrier-5-5mm-1
You are reading a single comment by @Hovis and its replies.
Click here to read the full conversation.
Airhead
user69121
@Hovis
Door seal question. Don't have one, would like one to stop draughts. It's a timber frame with a groove which I presume is for a seal. Can anyone what style of seal to go for here?
Cheers
1 Attachment