Carbon cx tubular wheelset with challenge grifos SOLD

I'll do my research and update they must be convertible as they are called 3 in 1 hubs the clue is in the title so i assumed that meant qr, 12 and 15mm with different end caps ?

If someone can confirm this I'm interested

I'll post updates and relevant part numbers later 👍

They're 772SB so:
https://www.wheelproject.com/en/novatec-d772sb-d792sb-conversion-kit-to-12-x-142-mm-alloy
Etc etc Should work to convert to Thru'

https://www.aliexpress.com/item/32812365349.html
For the front.
I'm sure there are other sources since the hubs are the base for many, many other rebadged options (I think Hunt 4 seasons V1 too from memory- but not 100% on that- they look similar.
@gbj_tester could probably confirm)

Thanks @lowbrows is right and the front hub is 3 in 1 and the rear 4 in 1 and kits are available to run whatever you want. They are cheap and easily available. I should have bought a bunch of axles and end caps for these when i had them built really but both my cx bikes were qr at the time. Researching the adapters it looks like there are 2 versions of these front hubs one with press in end caps and one with threaded ends. Both kits are available i just need to confirm which ones you need. I've sent an email to my wheel guy to find out which version my hubs are whilst I'm away otherwise it'll be Mon/Tuesday before i have time to take a look inside myself. @bitterbuffalo and @fizzy.bleach what axles are you running?
I'll update on this ASAP

I took a look inside the hubs today to check and measure everything up as well as checking the parts are actually available novatec wheels eu direct seems like the best place as everything was clearly listed for compatability checks,everything in stock or Sjscycles.co.uk has uk stock if your in a real hurry . Front hub takes press fit end caps it has a 100x15mm axle inside and caps just pull out and press in for any variation from qr to 15mm for £10 and its literally a 30 second swap. The rear unscrews with a 135x12 mm axle inside but as the drive side end cap is part of the axle (qr in my case) you have to buy an axle and end cap conversion for 135 or 142x12mm still only £20 and takes 2 minutes. I think these are actually sold now but i took the time this afternoon as people were asking so i thought i may as well put it up here for reference

3 Attachments

cheers mate, appreciate it anyway

Yeah definitely sold now but just incase someone else is selling some wheels built on these exact hubs and isn't sure about the cross standard compatibility on them its all here 😁

good price as well.