You are reading a single comment by @Retro_Bastard and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Retro_Bastard
I took a look inside the hubs today to check and measure everything up as well as checking the parts are actually available novatec wheels eu direct seems like the best place as everything was clearly listed for compatability checks,everything in stock or Sjscycles.co.uk has uk stock if your in a real hurry . Front hub takes press fit end caps it has a 100x15mm axle inside and caps just pull out and press in for any variation from qr to 15mm for £10 and its literally a 30 second swap. The rear unscrews with a 135x12 mm axle inside but as the drive side end cap is part of the axle (qr in my case) you have to buy an axle and end cap conversion for 135 or 142x12mm still only £20 and takes 2 minutes. I think these are actually sold now but i took the time this afternoon as people were asking so i thought i may as well put it up here for reference
3 Attachments