-
Thanks @lowbrows is right and the front hub is 3 in 1 and the rear 4 in 1 and kits are available to run whatever you want. They are cheap and easily available. I should have bought a bunch of axles and end caps for these when i had them built really but both my cx bikes were qr at the time. Researching the adapters it looks like there are 2 versions of these front hubs one with press in end caps and one with threaded ends. Both kits are available i just need to confirm which ones you need. I've sent an email to my wheel guy to find out which version my hubs are whilst I'm away otherwise it'll be Mon/Tuesday before i have time to take a look inside myself. @bitterbuffalo and @fizzy.bleach what axles are you running?
I'll update on this ASAP
You are reading a single comment by @Retro_Bastard and its replies.
Click here to read the full conversation.
Retro_Bastard
They're 772SB so:
https://www.wheelproject.com/en/novatec-d772sb-d792sb-conversion-kit-to-12-x-142-mm-alloy
Etc etc Should work to convert to Thru'
https://www.aliexpress.com/item/32812365349.html
For the front.
I'm sure there are other sources since the hubs are the base for many, many other rebadged options (I think Hunt 4 seasons V1 too from memory- but not 100% on that- they look similar.
@gbj_tester could probably confirm)