You are reading a single comment by @Adhiero and its replies.
Click here to read the full conversation.
-
A tip I would give is to release the spring of the side you want to adjust, so the pad is pushed against the MSW. Makes adjusting very easy.
Another tip is to release both springs, that way you’re not fighting the system.
Release springs, remove and replace one pad, hold down the brake lever with one hand, align and tighten the pad with the other. If the pad becomes misaligned on the rim when you tighten (they usually do), loosen the pad a bit, realign, hold down the brake lever and tighten the pad finger tight, then use your braking hand to hold the pad in place and cinch it down. Repeat for other side.
Adhiero
withered_preacher
How many times do I have to set up my v-brakes before I find it easy and become one of those people who don't see the point in hydro discs.