You are reading a single comment by @musa and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
musa
mespilus
A sharp blade should enable you to have a 'pull tab',
that reveals the adhered edge that you can loosen with the same sharp blade.
Any residue left might come away with a bit of a scrape,
or the application of a 'Silicone Remover'.
Soudal do one, Toolstation item no. 75719
that is a lot less damaging to the Environment than the previous versions.
Sealants work better in compression than tension,
so fill the bath up before you re-seal.
Best results from the bead of sealant sticking to around 6mm of bath edge and tile.
The sanitary silicones cure/harden by giving off vinegary fumes.
The first noseful will be a shock to the olfactory system and may make your eyes water.
The surface of the freshly applied sealant may well be tack-free within an hour (or two),
but the rate of cure slows down significantly as the thickness of the cured layer increases.
Best to leave it overnight if you can before allowing the water to drain away.