You are reading a single comment by @190-215GPa and its replies.
Click here to read the full conversation.
-
Just wondering what the benefits are? If there isn’t sufficient clearance then steering will probably feel horrible. Potential for component failure is also a concern.
190-215GPa-
Potential for component failure is also a concern.
Yes, this would worry me. If the insides of the cups get worn away by the steerer then the cups will come adrift. If the steerer get worn down by the cups then it could snap.
-
Yeah with the amount of loads that go through a steerer, that amount of material will deform pretty sharpish.
I've seen the 'new' threaded BB30 to BSA fail on a few occasions so far; I know the loads aren't proportional, but you get the picture.
ffm
Chak
Yes I meant 0.1mm = 2x 0.05mm.
So you mean the steering could seize?