Wheel build help

You are reading a single comment by @r_mash and its replies. Click here to read the full conversation.

•

r_mash

are there end caps to convert novatec front hubs to 12mm TA? if so, whats the best place to source them

•

gbj_tester in reply to @r_mash

novatec front hubs

Which of the dozens of models they have made over the past few years?
•

thecycleclcinic in reply to @r_mash

of its the d711sb then good luck
D771 and D791 end caps exists. I have the d791 end caps. There are other hubs they do.

To convert to 12mm TA the front hub needs to have push fit end caps.
•

Brommers in reply to @r_mash

Maybe. Depends which hubs they are. Some are convertible, some aren't. Do you know which model they are? If not, then pics would help.
•

velosaurus in reply to @r_mash

Once you have identified the hub check Prime end caps on CRC and Pinnacle end caps on Evans as they are Novatec I think. Picked up some Pinnacle/Novatec end caps quite cheap from evans.
•

mcJ78 in reply to @r_mash

I've found bdop cycling in Taiwan pretty good for Novatec spares in the past

https://bdopcycling.com/

Also came across this website recently - loads of info / technical drawings on all the hubs http://www.nguide.eu/hubs