-
I had a lot of trouble getting the hydraulic line through a T47 BB shell.
Same here. Brommers Bike #4 has a T47 shell with a hydraulic brake hose running through the BB shell. Man, that was a PITA to build. I like to think it was worth it though.
Brommers-
Slightly unrelated but in the spirit of hiding cables....noticed the rear dynamo light routing on the ST on your bike and then through the wishbone.
I'm considering how to get my rear dynamo cable routed without running cable externally from the BB or front mech port. I know drilling a small hole below the seatpost insertion point is done for dropper posts, but a bad idea on Ti do you reckon? Frame warranty already invalidated and the hole would be very small...
-
oh what is this? looks hot. send more.
onyerbike
zmjones_
I had a lot of trouble getting the hydraulic line through a T47 BB shell. Had to make a custom sleeve to use in between the cups, drilled the NDS cup to run the line through and shortened the drive side cup on the lathe to get the di2 wire into the chainstay.
@PhilDAS, interesting tactics. using a 1,5 external top headset bearing with a 1,125 steerer (or tapered steerer) for extra room to run your internals.