You are reading a single comment by @PhilDAS and its replies.
Click here to read the full conversation.
-
The problem is I actually need the articulated mount to be sideways because the bosses on the fork are pointed slightly backwards rather than 90 degrees to the front of the bike.
So if I use a 90 degree adapter like I think you're referring to, and then have the light the right way up, I can only adjust it up and down but it'll point to the right instead of straight ahead
PhilDAS-
ah ok, fair enough, but one idea could be to use the washers/spacers from a V-brake pad to 'toe in' the light?
also looks like those forks have an eyelet above the TA hole?
-
Maybe you could twist the PM adapter a bit? Clamp the lower half in a vice and try to twist it with a screwdriver through the upper hole.
spotter
Tijmen
I use a post mount adaptor for this, and then the light sits the right way up without sticking out too far, will try and find you a pic
EDIT: different eyelet but you get the idea
Its very stiff for a mount