Dynamo Lights

You are reading a single comment by @PhilDAS and its replies. Click here to read the full conversation.

•

yoshy in reply to @PhilDAS
Any of these might be impossible or simply not work:
1. if the bottom of the steerer is accessible, a bung in there with some flat alu contraption sticking out forwards to attach to
2. (this is a bit ridiculous) some kind of slim bit of metal to fit under the crown race, with fittings for the light at the front
3. (in a similar vein) a custom spacer under the stem with fittings that drop down suitably far
Ofc they're all kinda silly, potentially ugly and a lot of work but so is the rack

•

PhilDAS in reply to @yoshy
1. It isn't, as per most full carbon forks
2. I'd gladly go for this option if it existed, and it does possibly for smaller steerers but I've never seen it for 1 1/2". Not to mention that this fork has an integrated crown race so if I change the fork, I may as well find one with the crown drilled.
3. Not sure how much better than mounting under the bars this would be and it might interfere with cables. If it's long enough to clear, it would be flexible

•

amey in reply to @PhilDAS

what about this? https://www.planetx.co.uk/i/q/LINILH6/nitto-lamp-holder-6-r

About

Avatar for PhilDAS @PhilDAS started