You are reading a single comment by @yoshy and its replies.
Click here to read the full conversation.
-
Any of these might be impossible or simply not work:
- if the bottom of the steerer is accessible, a bung in there with some flat alu contraption sticking out forwards to attach to
- (this is a bit ridiculous) some kind of slim bit of metal to fit under the crown race, with fittings for the light at the front
- (in a similar vein) a custom spacer under the stem with fittings that drop down suitably far
Ofc they're all kinda silly, potentially ugly and a lot of work but so is the rack
- if the bottom of the steerer is accessible, a bung in there with some flat alu contraption sticking out forwards to attach to
yoshy-
It isn't, as per most full carbon forks
I'd gladly go for this option if it existed, and it does possibly for smaller steerers but I've never seen it for 1 1/2". Not to mention that this fork has an integrated crown race so if I change the fork, I may as well find one with the crown drilled.
Not sure how much better than mounting under the bars this would be and it might interfere with cables. If it's long enough to clear, it would be flexible
PhilDAS
Wot they said.
I think it’s supposed to be either upright or upside down, not side ways but I’ll see how it holds up