Do you have a mounting plate for that? Or will you use the the clamp?
If you use the clamp, see if you can find additional protection for the frame. Without it this is what can happen to your chain stays.
https://www.lfgss.com/comments/14491376/
Essentially, the bottom half will chew through the paint and which allows rust. As the stands are OK, but not great for stability, it is also easy to over tighten the clamp and crimp the stays.
No mounting plate, so I’ll be using the clamp.
I haven’t installed it yet, but was planning on wrapping the stays with old inner tube and electrical tape first.
@Verbs_&_Nouns started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Do you have a mounting plate for that? Or will you use the the clamp?
If you use the clamp, see if you can find additional protection for the frame. Without it this is what can happen to your chain stays.
https://www.lfgss.com/comments/14491376/
Essentially, the bottom half will chew through the paint and which allows rust. As the stands are OK, but not great for stability, it is also easy to over tighten the clamp and crimp the stays.