-
• #2
The latter.
-
• #3
damn. Thanks mate
-
• #4
Pretty unlikely you’ll find a fork of that style with a 1” steerer.
Maybe from some really cheaply made catalogue store dirt jump style mtb but they’d likely weigh more than the moon.
-
• #5
Ye I'm starting to realise this. I have found some in America, cost an arm and a leg to get it over here though. Found another guy in the US who makes custom 1" Headsets which fit a 1 1/8" steerer but the thing with that is most of these 1 1/8" jump forks have really short steerers, my head tube is long so need to decide what I'm going to do
-
• #6
Found another guy in the US who makes custom 1" Headsets which fit a 1 1/8" steerer...
If you go that route then make sure its a normal 1" headtube that the headset will fit.
There's a 1" bmx/cruiser size that's not very far off 1 1/8" but it's an american thing. Loads of bikes over there use it, very few over here.
-
• #7
Ye spoke with the guy he said for this to work the ID of my head tube needs to be 32.5mm. I think thats the same as mine but I will have to measure when I get it back from powder coating
-
• #8
Yeah that's the bigger size, 30.2mm is the ISO standard for 1" head tubes.
-
• #9
I have a charge Plug also I am looking for a few forks for tricks etc on that lines... Did you find any suitable?
-
• #10
I bought some from America. Small fortune but that was the only option for my frame.
-
• #11
which one did you go for? Curious really.
-
• #12
There was a shop on eBay that sells cruiser/ vintage parts. They’re just a non branded straight cruiser fork with a 1” steerer which is what I needed for my Peugeot frame
1 Attachment
-
• #13
looking nice!!
Congrats mate! -
• #14
Link me that seller please, I am recovering a vintage frame for tricks and need a straight 1" FGFS fork ;)
CHeerssss -
• #15
Just a heads up don't expect the best service from the guy. Mine came scratched so had to claim money back from paypal as he ignored me
I've seen a 2010 Charge Plug Freestyler on ebay, I might buy it just for the forks but I can't find any detailed spec online.
Anyone know if these were a 1" fork or 1 1/8"?
Cheers
1 Attachment