You are reading a single comment by @M_V and its replies.
Click here to read the full conversation.
-
They sure are.
I used (nearly) the same fork crown to tie them together as will be on the Steamroller fork that the frame will be built with.
*Nearly because despite the steamy fork being advertised as 38mm tyre max and this bring the ‘40mm clearance’ version of the fork crown, this one is slightly narrower.
Thought it’d tie the bike together to match the seatstays to the fork.
Adds a bit of weight but client wants to be able to fit a rear rack mounted child seat so I figure it’s a good place to over build.
M_V
🅑🅐🅣🅣
cool! are the seatstays fork blades?