You are reading a single comment by @Skülly and its replies.
Click here to read the full conversation.
-
possibly supposed to take a quick release lever like this?
https://www.sjscycles.co.uk/seat-posts/kalloy-steel-qr-seat-bolt-silver-m6-x-55mm/
but if you don't want QR then look at something like this;
https://www.chainreactioncycles.com/brand-x-seat-clamp-bolt/rp-prod6255
-
what’s the neat ‘correct’ solution?
I don't know about correct, but neat would be a button head screw (Torx ideally, but Allen key if you must) into a Nylock nut. That gets you nice rounded no-snag surfaces both ends as long as the screw doesn't project past the nut.
Dry
gbj_tester
@Skülly
Does anyone know what sort of pinch bolt is supposed to be used with this collar? Because it has no recess I could use any old bolt but what’s the neat ‘correct’ solution? The hole is 5.8mm with new powdercoat everywhere so presumably really 6mm.
2 Attachments