You are reading a single comment by @hiraethus and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@hiraethus
Got the rest of the roof on and started to frame the inside for the insulation and lining
First few panels went in, cut to size with a stanley knife
(Bought a proper insulation saw after that; so much easier)
Electrician came to do the first fix
6 x LED strips, new mini consumer unit and wiring for a dozen sockets and external lighting
Installed the roof trim and made sure that the roof was properly watertight
Then got to work on the rest of the ceiling
Ripped out a rotten old workbench at the far end. Was mostly held together by woodworm shit.
Then started battening the walls
Foil blanket insulation on top of that, with a vapour barrier on the ceiling
Sealed one of the doors shut as it'll never be used (but left the mechanism in place just in case)
Going to build an insulated stud wall in front of this.