-
Park anti seize all round, it's greasy enough for nipple rim interface.
Yep, did this. Lesson learned: more = betterer. First time I just barely coated the threads and they started to bind / windup when partially tensioned. Unthreaded, added a big goop of lube to every spoke and wound it back in. Much better after that.
Anyway, first wheel build. DT xr331 28/32h on Novatec with Sapim Laser spokes to make things difficult. Also used the alloy squorx nipples & washers that came with the rims. Used a cheap stand and a knockoff tension meter which I don't entirely trust except as a relative tension indicator. I assume it's off by 10 or 20% in absolute terms.
Going to ride them with tubes for a while in case (who am I kidding, definitely when) I need to make adjustments. 42c tires mounted tubeless won't fit in my stand.
Building my first wheelset next week and went down the lubrication internet rabbit hole, eventually circled back to just using the Park anti-seize for the threads and grease on the nipple/washer I already have.