-
So I’m going to invest in a decent length straight edge for checking alignment
Best straight edge I've ever found is............. String (it's also the cheapest). If you drop it, it won't bend or get damaged it can be a near infinite length yet roll up and be put in a pocket you don't need special cases for it and if you join to lengths together it will not mess up and have a kink at the join.
In terms of moisture and expansion of blocks when is the best time of year to install?
Herringbone parquet is more forgiving than T&G solid wood flooring the glue prevents much of the expansion, although if you regularly soak it - mopping for example you will get lipping at the joints this is because although the bottom cannot swell or move the top will although this requires a lot of moisture regularly. So it shouldn't matter too much.
You are reading a single comment by @Bobbo and its replies.
Click here to read the full conversation.
Bobbo
Thanks Bobbo,
I have a decent chop saw, multi tool, accurate layout for herringbone pattern. I will focus on buildup from wall, skirting line two depth border and brass inlay to establish sharp straight line on masking tape for each herringbone cut during dry fit. I will need that mitred 90’ start in the centre of the room then work back and forth toward bay window half of the first room.
thanks for the advice to dry fit first.. I plan to do everything very slowly before sticking down the final herringbone row to border and will practice with chop saw to gauge good fit. Working around the W tops/bottoms not sides of the room will be where I will be most tested. So I’m going to invest in a decent length straight edge for checking alignment. I have over ordered parquet so should have enough to practice with / destroy. Gonna need my knees to forgive me. This will be quite a challenge, but I hope a great learning experience.
In terms of moisture and expansion of blocks when is the best time of year to install?