Chainline quiz:
1x10 Shimano drivetrain with narrow-wide ring up front and 10-speed cassette on Deore FH-M510 ‘9-speed’ freehub, 135mm axle, no spacers on cassette.
Current chainring is sat 43.5mm from centre of frame and I’m getting slight chain rub on small cogs.
Should the chainring be further out?
no spacers on cassette.
There’s your problem. There should be a spacer between each cog.
Jokes aside, does it rub in the largest cog/s? What BB width does your crankset recommend?
@Adhiero started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Chainline quiz:
1x10 Shimano drivetrain with narrow-wide ring up front and 10-speed cassette on Deore FH-M510 ‘9-speed’ freehub, 135mm axle, no spacers on cassette.
Current chainring is sat 43.5mm from centre of frame and I’m getting slight chain rub on small cogs.
Should the chainring be further out?